main flux

英 [meɪn flʌks] 美 [meɪn flʌks]

网络  主磁通

化学



双语例句

  1. Main factors influencing CH_4 flux from a Phragmites australis wetland in the Min River estuary
    闽江河口芦苇潮汐湿地甲烷通量及主要影响因子
  2. To counter the phenomenon of high temperature appeared in the fully mechanized working face, the main sources of heat flux were investigated.
    针对综采工作面出现的高温现象,调查了工作面热流的主要来源。
  3. Because the main flux saturation is taken into account, the V-curve concentration phenomenon of the linear model during over excitation is eliminated.
    仿真结果表明,考虑主磁路饱和后,消除了线性模型下隐极同步电机V形曲线过励时相对密集的现象。
  4. The magnetization parameter is estimated by the least-squares parameter identification with the consideration of main flux saturation and the experimental data agree with the simulative results.
    考虑主磁路饱和的同步电机激磁参数的估计值由最小二乘法参数辨识得到,实验数据与仿真结果基本吻合。
  5. The averaged gas velocity of flowing backward between the exhausting duct and the mixture tube increases with the rise of the main nozzle flux and the downwash flow velocity.
    实验发现外套出口和混合管之间夹层存在气流倒流现象,倒流平均速度随着主喷管流量和下洗气流速度增加而增加。
  6. The optimization formula of green body of building material glazed tile has been developed using gangue as main raw materials and talcum as main flux.
    以煤矸石为主要原料和滑石尾矿为主要熔剂,设计和优化了生产绿色环保建筑琉璃瓦坯体配方。
  7. Through the analysis of experiment data, the formation process of DM could be fitted to the standard filtration model during the beginning 10~ 13 min of the DM formation, during which, pore blockage is the main factor causing the flux decreases rapidly.
    通过对实验数据分析可知,动态膜形成初期10~13min,膜的形成过程可用标准过滤模型描述,在此期间颗粒堵塞载体膜管孔道,致使渗透液通量急剧减小;
  8. Thereby, the main flux saturation should be compensated to improve performance of the vector control system.
    工作在弱磁区时,磁饱和效应会明显影响速度观测器的精度,带来较大转速估计误差,应对观测器进行磁饱和补偿以提高矢量控制系统的调速性能。
  9. Further research shows that element Mg in 6063 is the main cause making the flux ineffective and the quality of brazed seam degraded.
    进一步的研究指出:6063铝合金中的合金元素Mg是使钎剂失效和恶化钎缝质量的主要原因。
  10. The main flux of asynchronous motor varies with the power voltage and the para-meter of excited inductance becomes a variable.
    电源电压变化时,异步电动机主磁通随之变化,与之相应的激磁电感参数将是一个变数。
  11. A measuring method combining main magnetic flux and magnetic flux leakage for approaching the residual wall thickness of the oil well tubing in-service was presented.
    提出采用主磁通与漏磁通相结合的方法检测在用油管剩余壁厚的方法。
  12. This paper has analysed the magnetic field distribution in YCT under noload and the influence of different armature reactions, and especially, the main flux variance with armature reaction. We provide the foundation to unify the design for engineering.
    本文分析了YCT电机空载和在不同电枢反应影响下磁场分布情况,尤其是分析了主磁通分布和受电枢反应影响的变化情况,为在工程上统一设计方法奠定了基础。
  13. The authors analyze the influence in vector controlled induction machine caused by parameter variation and main flux saturation affects speed estimation of adaptive state observer.
    在矢量控制感应电动机系统中,当电机参数发生变化,或出现磁路饱和时,将会影响速度控制的准确性,使速度观测器精度受影响。
  14. The flux due to permanent magnet is the main part of gap flux, the rest flux is produced by the winding coil, which play a part of regulation.
    永磁体产生的磁场是气隙磁场的主要部分,另一部分是由辅助励磁绕组的电流来激励产生,起调节磁场的作用。
  15. The main type of flux pinning in sample is surface pinning.
    样品的钉扎作用主要来自晶粒间的晶面钉扎作用。
  16. The system accomplished in control and mechanism two ways, the virtue is that it can adjust the adding quantity as a provided proportion following the main flux in real time.
    添加系统从控制部分和机械部分两方面来实现,其特点是添加剂的添加量能根据面粉主流量的变化按照给定比例进行实时准确调节添加。
  17. Wall thickness is a key index for water-wall tube inspection in power plant, in order to inspect the tube quickly and evaluate the wall thickness quantitatively, a new method combining the magnetic main flux ( MMF) with ultrasonic technique was proposed.
    壁厚是电站锅炉水冷壁管质量监测的一个关键指标,为了实现对水冷壁管的快速无损检测和质量评价,提出了主磁通检测与超声波检测相融合的壁厚检测新方法。
  18. Its main uses are flux of pudding iron, the building road materials for highway and railway, agriculture fertilizer, materials for construction and so on.
    主要用于炼铁熔剂、公路及铁路筑路材料、农业肥料、建筑材料等。
  19. The Generalized Mathematical Model of the Induction Machines Incorporating the Effects of Main and Leakage Flux Saturation
    考虑主、漏磁路饱和影响的异步电机数学模型
  20. Then we researched the main flux of nitrobenzene contaminant passed through every cross section.
    之后研究了硝基污染物污染团经过各断面时期的主要通量。
  21. The main factors influencing flux of methane emission from mires are the depth of water table, substrate, type and density of plant in mires, temperature, pH, exogenous nitrogen and soil basic properties.
    在影响沼泽排放甲烷能力中,水位的变化最为强烈,底物、植物种类及数量和温度次之,pH、外源氮和土壤性质也有一定的作用。
  22. The main properties of mold flux such as the viscosity-temperature curve and melting point have been experimentally studied and law of effects of the essential constituents on the properties of the mold flux found out.
    对连铸保护渣的粘度&温度曲线及熔化温度性能等进行了试验研究,得出基本组分对保护渣性能的影响规律;
  23. Study of Main Flux Saturation Influence in Speed Estimating of Induction Machine
    磁饱和效应对感应电动机转速辨识影响的研究
  24. Based on the constructed model, with the radiative energy and the main steam flux acting as the forward-feed signal, using the compensation controlling method, adding the warp control of the superheated steam temperature, a new strategy to control the very temperature if formed.
    利用得到的模型,借助于辐射能和主蒸汽流量作为前馈信号,采用补偿控制方式,加上过热汽温偏差控制,组成新的过热汽温控制策略。
  25. When the main swirl angular momentum flux is about equal to in cylinder air total angular momentum flux, stable swirl formation interface is shaped.
    当缸内空气主涡流动量矩流率与缸内空气总动量矩流率近似相等时,就形成了始稳面;
  26. It analyzes main problem exiting in flux recovery fitting for production of SSAW pipe and new type of flux reclaimed fitting is designed which possesses outstand sealability and can be operated continuously.
    针对埋弧焊钢管生产中焊剂回收装置存在的问题进行分析与研究,设计了一种密封好、连续工作性强的焊剂回收装置。
  27. The low surface tension and low viscosity of aluminum alloys are the reason that the change of surface tension temperature gradient is not the main mechanism of activating flux increasing weld penetration of activating TIG welding.
    而铝合金材料表面张力小,粘度低,是导致表面张力温度梯度改变不是活性剂增加铝合金活性TIG焊熔深的主要机理的重要原因。
  28. Error model of calculated flux linkage is derived and the analysis implies that delta inductance is the main reason of flux linkage error.
    对磁链计算误差的数学模型进行了分析,结果表明电机电感变化是造成磁链计算误差的主要原因。
  29. Size is too small, the main magnetic flux when the internal reduced output power is also time-varying small; size is too large, though reduced magnetic flux leakage, the output power increases, but the volume and a corresponding increase in quality. 3.
    尺寸过小时,其内部的主磁通时减小的,输出功率也时变小的;尺寸过大时,虽然漏磁减小,输出功率增大,但是体积和质量也相应的增加。